Cooling of exothermic processes with KTI ice plants for pigment production
Dyes and pigments are used, among others, in the plastics industry, dye industry and textile industry and other industries. During production, they are synthesized in reactors, where an exothermic chemical reaction takes place.
The sometimes very high temperatures involved must be controlled to comply with safety and quality regulations in order to rule out faulty reactions.
This can be done with Flake ice controlled. The flake ice plants (FLIP) produce dry ice with very good heat absorption properties in compliance with environmental, health and safety guidelines.
Your advantages through KTI ice production
KTI Flake Ice Plants (FLIP) for the Control of Exothermic Reactions
KTI's Flake Ice Plants (FLIP) are built to the industry's exacting electrical and safety standards and are supplied completely from a single source. This includes the construction of pressure vessels and the ice makers according to the provisions of the Pressure Vessel Regulation 97/23/CE, explosion-proof motors and CE compliant electrical installation. At the same time we can Sizes from 20 to 100 tons of ice per day installed in one plant. Of course, these can also be easily expanded should the demand for ice be higher.
Special attention is paid to the Energy efficiency laid. KTI uses environmentally friendly refrigerants and has designed the systems to be optimized for this purpose. Likewise, plants with a Heat recovery be equipped.
The flake ice plants continuously fill the KTI ice storage facilities (MIS) with Flake ice. The ice is temporarily stored and is available when needed immediately retrievable. The ice is transported from the ice storage fully automatically.
Pneumatic conveying systems enable transport to several remote locations and reactors with high delivery rates. Likewise, weighing screws can be used for exact dosage of ice can also be integrated.
We are here for you
How would you like to be contacted?
